Product

We Are Professional

 

Magnetic Inductive Flow Meters


MAG-FLUX F5

Magnetic-inductive sensor suitable for measuring small and very small quantities

This special type of magnetic-inductive sensors (MID) is particularly suitable for measuring flows of very small quantities and especially for use in portioning and metering tasks. Combined with the Transmag 2 measuring transducer, the integrated metering software can solve complex metering challenges.

The magnetic-inductive sensor is recommended for flow measurement of electrically conductive liquids – especially for measuring very small quantities. The mag-flux F5 is available in nominal sizes DN 2 to DN 12.



Area of application:

Typical applications of the mag-flux F5 flow meter are measuring very small quantities and metering chemicals and pharmaceuticals.


The magnetic-inductive sensor is used in the following industries:
  • Plant and mechanical engineering
  • Chemicals
  • Laboratory and medical technology
  • Food
  • Water and wastewater

    • Advantages of the magnetic-inductive flow meter for measuring very small quantities:
  • Reliability (long-term stability, service life))
  • Minimal maintenance requirements
  • Simple commissioning
  • High measurement accuracy
  • Flexible installation position (however the measuring tube must be completely full at all times)
  • Manufacturer's application expertise
  • Short lead times

    • Special features of the flow meter:
  • Measuring tube made of highly corrosion and temperature-resistant zirconium oxide
  • Measuring tube internal diameter from 2 mm (0.078")
  • Robust and interference-free thanks to sealed steel casing

    • Very low measuring ranges:
  • 0 to 5 l/h (0 to 0.022 USgpm) for d.c. measurement
  • 0 to 3 l/h (0 to 0.0132 USgpm) for a.c. measurementr

    • Very low minimum conductivity:
  • 10 μS/cm for d.c. measurement
  • 0.1 μS/cm for a.c. measurement

    • Various process connections:
  • Threads: DIN, NPT, BSP
  • Flange: DIN, ANSI, JIS
  • Clamp
  • DIN 11851
  • Others on request

    • Various process connection materials:
  • M. No. 1.4571
  • Hastelloy C4 M. No. 2.4610
  • PVDF with in Hastelloy C4 M. No. 2.4610 earthing ring
  • Titanium
  • Others on request
    		•

    Operating principle pulsed constant field (DC)
    Measuring accuracy¹ error of measurement: ±0,4 % ±1 mm/s of MV
    repeatability: ± 0,15 % of MV
    Liquids min. conductivity: 20 μS/cm
    min. flow velocity: 0.25 m/s (0.82 ft/s)
    max. flow velocity: 10 m/s (32.8 ft/s)
    Temperature limits² process connection - metal:
    0 °C to +150 °C
    process connection - PVDF:
    +120 °C / 3 bar; +50 °C / 10 bar
    Tube materials zirconium oxide
    Electrodes materials platinium 99,9 %, sintered
    Process connections Thread: DIN, NPT, BSP
    Flange: ANSI B 16.5
    (Tri-) Camp/DIN 11851
    others on request
    Materials:
    stainless steel Mat. No. 1.4571,
    Hastelloy® C4, PVDF, titanium
    Table: DN 15 – DN 2000

     


  • Calibration
  • Service deployment (on-site inspection / maintenance)
  • Repair
  • Customer consulting by phone
  • Extended warranty (on request if required)
    		•