Type WANGEN Twin NG

The new generation of the WANGEN Twin NG screw pump is part of the hygienic pumping solutions from WANGEN and was designed to reliably pump low to highly viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required.The hygienic pump for food and beverages, chemicals and cosmetics.

- Spindle replacement without the need to re-synchronise the spindle shafts, thanks to fast-X-change® technology, developed by WANGEN PUMPEN.
- Cartridge design for simple and quick seal replacement.
- Coupling alignment by self-centring flange housing (lantern optionally available). Therefore no need for re-alignment of the coupling, for instance after service work
- Available in the sizes 70, 104, 130, 180.

Type WANGEN MX-R

The trough shape of the hygienic WANGEN MX-R pump prevents deposits from forming on the hopper walls, overfeeding in the pump tunnel ensures efficient conveying.

Type WANGEN VarioTwin NG

Gently feeding high-viscosity media: The hygienic and patented add-on to the WANGEN Twin screw pump. A add-on module of the WANGEN Twin NG with hopper and screw conveyor.

Type HYLINE

Highlight of the hygienic progressing cavity pump WANGEN HYLINE: The flexible and maintenance-free joint is coated with elastomer. A constant shaft diameter construction design prevents sedimentation of the media to be pumped.

The intelligent design of this hygienic pump requires no additional seals in the product chamber. Pump disassembly is easily carried out by removing all pump component connections outside the product chamber.

Type KB-S

The WANGEN progressing cavity pumps of the KB-S serie are, in contrast to the KL-S serie, equipped with a block housing. There, the drive is coupled directly to the pump housing, which is ideal for normal pump operation or for small conveyed volumes. The pump conveys viscous and abrasive mediums.

Type KB-S GG

The WANGEN progressing cavity pump KB-S GG is one of the basic products of WANGEN PUMPEN. One of the benefits of this pump is clearly the fewer parts within the individual assemblies. The KB-S GG is of cast iron and has a block housing (the drive is coupled directly to the pump housing).

Type KL-S

The progressing cavity pump serie WANGEN KL-S are basic products of Pumpenfabrik Wangen. The clear benefit is in the low lifecycle costs. This universally usable pump works with almost every low and extrem high viscous mediums (1 mPas -3.000.000 mPas).

Type KL-SL Hygienic

The pumps of the KL-SL serie convince through their easy cleaning and minimal deadspace construction. They can run heat- or coolable. Hygienic highlights are for example CIP (Cleaning in Place) as well as low pulsation and continuous conveying, independent of pressure and viscosity.

Type WANGEN MX-F

The WANGEN MX-F is a hygienic progressing cavity pump for emtying drums and vessels that contains high viscous mediums. The pump is therefore mounted on a plate. Both, pump and plate, is then pressed into the medium. The so displaced material feeds the pump through a hole in the plate.

This ensures the permanent feeding of the pump, even after changing the medium.